Linux'ta Sistem Açılış Hızını Öğrenmek

Bu konuyu okuyanlar

Hopeツ︎

Go for the EYES BOO. Go for the EYES! ?
Katılım
9 Mart 2016
Mesajlar
2,397
Çözümler
1
Reaksiyon puanı
2,271
Puanları
113
Yaş
26
Değerli Linux kullanıcıları, bu konuda amaç öncelikle terminalde sistemimizin açılış hızını ne şekilde öğreniriz ve öğrenmek için ne yapmamız gerekir? olacak. Yani systemd-analyze uçbirim çıktılarını paylaşacağız... bakalım neler dönüyor arka planda, ilk ateşi ben yakıyorum... dilerseniz ekran görüntüsü olarak ya da kod etiketi içinde çıktınızı aktarabilirsiniz.

nOgr1N.png
 

iblah60

Asistan
Katılım
9 Temmuz 2014
Mesajlar
450
Reaksiyon puanı
482
Puanları
63
Yaş
29
telefon dan yazıyorum ama pc yi elime alınca deniyc3m

---- Mesajlar birleştirildi ----

şimdi bunlardan hangisi ne kadqr zamanda açıldığını gösteriyo
 
Son düzenleme:

Hopeツ︎

Go for the EYES BOO. Go for the EYES! ?
Katılım
9 Mart 2016
Mesajlar
2,397
Çözümler
1
Reaksiyon puanı
2,271
Puanları
113
Yaş
26
telefon dan yazıyorum ama pc yi elime alınca deniyc3m

---- Mesajlar birleştirildi ----

şimdi bunlardan hangisi ne kadqr zamanda açıldığını gösteriyo
(Startup) = Başlangıç hızı, (Kernel) = Çekirdek hızı, (UserSpace) = Görüntülenen ortam hızı
 

iblah60

Asistan
Katılım
9 Temmuz 2014
Mesajlar
450
Reaksiyon puanı
482
Puanları
63
Yaş
29
anlatım için teşekkürler
 

ConfickerBelasi

Müdavim
Katılım
8 Ekim 2011
Mesajlar
53,870
Çözümler
1
Reaksiyon puanı
16,121
Puanları
113
Kod:
systemd-analyze
Startup finished in 12.477s (kernel) + 29.604s (userspace) = 42.081s
Ekran Görüntüsü 2018-01-23 02-10-30.png

acelesi yok...
zaten:
Ekran Görüntüsü 2018-01-23 02-19-00.png
 

Finix

Daha mükemmel bir Troy
Katılım
4 Haziran 2008
Mesajlar
11,527
Reaksiyon puanı
2,285
Puanları
113
Bu biosu grubu falan da saymış galiba. Yalnız KDE kullanmasak 25 saniye yerine 14 saniyede açılacakmış.

Screenshot_20180123_182856.png
 

iblah60

Asistan
Katılım
9 Temmuz 2014
Mesajlar
450
Reaksiyon puanı
482
Puanları
63
Yaş
29
sonunda pc ye ulaştım buda açılış kernel ve görüntülenen ortam hızım
Kod:
Startup finished in 7.290s (kernel) + 1min 32.972s (userspace) = 1min 40.263s
 

Finix

Daha mükemmel bir Troy
Katılım
4 Haziran 2008
Mesajlar
11,527
Reaksiyon puanı
2,285
Puanları
113
sonunda pc ye ulaştım buda açılış kernel ve görüntülenen ortam hızım
Kod:
Startup finished in 7.290s (kernel) + 1min 32.972s (userspace) = 1min 40.263s
Usta hangi desktop o? Hakikatten bir sorun var gibi görünüyor.
 

iblah60

Asistan
Katılım
9 Temmuz 2014
Mesajlar
450
Reaksiyon puanı
482
Puanları
63
Yaş
29
linux mint xfce 500 gb hdd intel celeron işlemci
 

iblah60

Asistan
Katılım
9 Temmuz 2014
Mesajlar
450
Reaksiyon puanı
482
Puanları
63
Yaş
29
denedim de live olarak ama xfce daha stabildi sanki
 

Finix

Daha mükemmel bir Troy
Katılım
4 Haziran 2008
Mesajlar
11,527
Reaksiyon puanı
2,285
Puanları
113
Önceden HDD'ye Pisi Linux KDE kurduğumda yavaş çalışıyordu. Bence sistem açılış hızında disk de çok önemli.
Hocam ben buzdolabına bile kuruyorum ne diyorsunuz? Dolabın kapağı üç dakikada açılıyor ama startup müziğini duymak pek keyifli oluyor. Oh KDE connect var.
 

iblah60

Asistan
Katılım
9 Temmuz 2014
Mesajlar
450
Reaksiyon puanı
482
Puanları
63
Yaş
29
aynen 5400 rpm in de etkisi var tabii
 

Finix

Daha mükemmel bir Troy
Katılım
4 Haziran 2008
Mesajlar
11,527
Reaksiyon puanı
2,285
Puanları
113
Benim sistem daha yavaş açılıyor nedense:
Kod:
Startup finished in 9.445s (kernel) + 1min 57.280s (userspace) = 2min 6.725s
Bir de o kadar eski bir bilgisayar da değil. :rolleyes:
Abo ne oluyor burada yahu? Bir benim bilgisayar mı akhal beygiri gibi koşuyor?
 

iblah60

Asistan
Katılım
9 Temmuz 2014
Mesajlar
450
Reaksiyon puanı
482
Puanları
63
Yaş
29
o zaman benim bilgisayar da sıkıntı var
 

Hopeツ︎

Go for the EYES BOO. Go for the EYES! ?
Katılım
9 Mart 2016
Mesajlar
2,397
Çözümler
1
Reaksiyon puanı
2,271
Puanları
113
Yaş
26
Süre saymıyor gözlemlediğim kadarıyla. Ama başlangıçta birkaç satır "error -71" gibi hatalar veriyor. Onları araştırıp çözümünü bulmam lazım galiba.
Sistem başlangıcında aşıma uğratan bir şeyler var gibi görünüyor. Error ibaresi pek hayırlı olmaz genelde bunu çözdüğünde durumun daha iyi olacağına inanıyorum.
 

iblah60

Asistan
Katılım
9 Temmuz 2014
Mesajlar
450
Reaksiyon puanı
482
Puanları
63
Yaş
29
Kod:
Startup finished in 10.231s (kernel) + 29.111s (userspace) = 39.343s
buda pardus xfce den açılış hızı

---- Mesajlar birleştirildi ----

şu an linux mint i açtım aşırı derecede yavaş açılıyo buda dmseg çıktısı kırmızı olanlar da bi sıkıntı var ama anlayamadım kırmızı olanlar neden kırmızı bilen varmı
Kod:
dmesg
[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x504 with crng_init=0
[    0.000000] Linux version 4.13.0-31-generic (buildd@lcy01-amd64-013) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5)) #34~16.04.1-Ubuntu SMP Fri Jan 19 17:11:01 UTC 2018 (Ubuntu 4.13.0-31.34~16.04.1-generic 4.13.13)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-31-generic root=UUID=4b9b8d0d-c78c-4cc5-a8df-520a4dcad4cd ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000071831fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000071832000-0x0000000072131fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000072132000-0x0000000075cfefff] usable
[    0.000000] BIOS-e820: [mem 0x0000000075cff000-0x000000007663efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007663f000-0x0000000077fbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000077fbf000-0x0000000077ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000077fff000-0x0000000077ffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bc00000-0x000000007bffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c400000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe800000-0x00000000fe80ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 3.0 present.
[    0.000000] DMI: Acer Aspire ES1-531/Aspire ES1-531, BIOS V1.18 06/14/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 0FFA00000 mask FFFE00000 write-protect
[    0.000000]   2 base 000000000 mask F80000000 write-back
[    0.000000]   3 base 07C000000 mask FFC000000 uncachable
[    0.000000]   4 base 07BC00000 mask FFFC00000 uncachable
[    0.000000]   5 base 100000000 mask F80000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff9aa880098000] 98000 size 24576
[    0.000000] BRK [0x14c72a000, 0x14c72afff] PGTABLE
[    0.000000] BRK [0x14c72b000, 0x14c72bfff] PGTABLE
[    0.000000] BRK [0x14c72c000, 0x14c72cfff] PGTABLE
[    0.000000] BRK [0x14c72d000, 0x14c72dfff] PGTABLE
[    0.000000] BRK [0x14c72e000, 0x14c72efff] PGTABLE
[    0.000000] BRK [0x14c72f000, 0x14c72ffff] PGTABLE
[    0.000000] BRK [0x14c730000, 0x14c730fff] PGTABLE
[    0.000000] BRK [0x14c731000, 0x14c731fff] PGTABLE
[    0.000000] BRK [0x14c732000, 0x14c732fff] PGTABLE
[    0.000000] BRK [0x14c733000, 0x14c733fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31d31000-0x34e8ffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x0000000077FFE120 000094 (v01 ACRSYS ACRPRDCT 00000003      01000013)
[    0.000000] ACPI: FACP 0x0000000077FF4000 00010C (v05 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: DSDT 0x0000000077FE4000 00C0ED (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: FACS 0x0000000077F2F000 000040
[    0.000000] ACPI: UEFI 0x0000000077FFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MSDM 0x0000000077FFC000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: TCPA 0x0000000077FFB000 000032 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: UEFI 0x0000000077FFA000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000077FF5000 0041CE (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: MCFG 0x0000000077FF2000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000077FE3000 000763 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000077FE2000 000290 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000077FE1000 00017A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: APIC 0x0000000077FF3000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000077FE0000 000432 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: TPM2 0x0000000077FDF000 000034 (v03 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: FPDT 0x0000000077FF1000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x17ffd4000-0x17fffefff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000071831fff]
[    0.000000]   node   0: [mem 0x0000000072132000-0x0000000075cfefff]
[    0.000000]   node   0: [mem 0x0000000077fff000-0x0000000077ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[    0.000000] On node 0 totalpages: 1003933
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7432 pages used for memmap
[    0.000000]   DMA32 zone: 475648 pages, LIFO batch:31
[    0.000000]   Normal zone: 8192 pages used for memmap
[    0.000000]   Normal zone: 524288 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000007c800000-0x000000007e7fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x71832000-0x72131fff]
[    0.000000] PM: Registered nosave memory: [mem 0x75cff000-0x7663efff]
[    0.000000] PM: Registered nosave memory: [mem 0x7663f000-0x77fbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x77fbf000-0x77ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x78000000-0x7bbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7bc00000-0x7bffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7c3fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c400000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfe7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfe80ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe810000-0xfe9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @ffff9aa9ffc00000 s146520 r8192 d29608 u524288
[    0.000000] pcpu-alloc: s146520 r8192 d29608 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 988224
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-31-generic root=UUID=4b9b8d0d-c78c-4cc5-a8df-520a4dcad4cd ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3808832K/4015732K available (12300K kernel code, 2481K rwdata, 4004K rodata, 2364K init, 2368K bss, 206900K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 37823 entries in 148 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000]     Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.004000] tsc: Detected 1600.000 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.020677] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.020743] Security Framework initialized
[    0.020746] Yama: becoming mindful.
[    0.020792] AppArmor: AppArmor initialized
[    0.022614] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.023533] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.023600] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.023634] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.024076] CPU: Physical Processor ID: 0
[    0.024078] CPU: Processor Core ID: 0
[    0.024087] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.024089] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.024094] FEATURE SPEC_CTRL Not Present
[    0.024104] mce: CPU supports 6 MCE banks
[    0.024117] process: using mwait in idle threads
[    0.024123] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.024125] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.024431] Freeing SMP alternatives memory: 36K
[    0.026860] smpboot: Max logical packages: 2
[    0.028889] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068621] TSC deadline timer enabled
[    0.068625] smpboot: CPU0: Intel(R) Celeron(R) CPU  N3060  @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x4)
[    0.068819] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.068841] ... version:                3
[    0.068843] ... bit width:              40
[    0.068844] ... generic registers:      2
[    0.068845] ... value mask:             000000ffffffffff
[    0.068847] ... max period:             0000007fffffffff
[    0.068848] ... fixed-purpose events:   3
[    0.068849] ... event mask:             0000000700000003
[    0.068933] Hierarchical SRCU implementation.
[    0.070633] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.070679] smp: Bringing up secondary CPUs ...
[    0.070960] x86: Booting SMP configuration:
[    0.070963] .... node  #0, CPUs:      #1
[    0.071129] smp: Brought up 1 node, 2 CPUs
[    0.071129] smpboot: Total of 2 processors activated (6400.00 BogoMIPS)
[    0.072024] devtmpfs: initialized
[    0.072128] x86/mm: Memory block size: 128MB
[    0.073083] evm: security.selinux
[    0.073085] evm: security.SMACK64
[    0.073086] evm: security.SMACK64EXEC
[    0.073087] evm: security.SMACK64TRANSMUTE
[    0.073088] evm: security.SMACK64MMAP
[    0.073089] evm: security.ima
[    0.073091] evm: security.capability
[    0.073157] PM: Registering ACPI NVS region [mem 0x7663f000-0x77fbefff] (26738688 bytes)
[    0.073157] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.073157] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.073288] pinctrl core: initialized pinctrl subsystem
[    0.073500] RTC time: 23:27:08, date: 01/27/18
[    0.073709] NET: Registered protocol family 16
[    0.074199] cpuidle: using governor ladder
[    0.074199] cpuidle: using governor menu
[    0.074199] PCCT header not found.
[    0.074199] ACPI: bus type PCI registered
[    0.074199] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.074199] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.074199] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.074199] PCI: Using configuration type 1 for base access
[    0.078577] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.078577] ACPI: Added _OSI(Module Device)
[    0.078577] ACPI: Added _OSI(Processor Device)
[    0.078577] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.078577] ACPI: Added _OSI(Processor Aggregator Device)
[    0.086006] ACPI Error: No handler for Region [RAM_] (ffff9aa9fb5631b0) [EmbeddedControl] (20170531/evregion-166)
[    0.086099] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20170531/exfldio-299)
[    0.086183] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._REG, AE_NOT_EXIST (20170531/psparse-550)
[    0.086367] ACPI Error: No handler for Region [RAM_] (ffff9aa9fb5631b0) [EmbeddedControl] (20170531/evregion-166)
[    0.086453] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20170531/exfldio-299)
[    0.086536] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._REG, AE_NOT_EXIST (20170531/psparse-550)
[    0.090130] ACPI: Dynamic OEM Table Load:
[    0.090146] ACPI: SSDT 0xFFFF9AA9FA9FC000 00056E (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.090595] ACPI: Dynamic OEM Table Load:
[    0.090607] ACPI: SSDT 0xFFFF9AA9FAA5C000 0003A5 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.091472] ACPI: Dynamic OEM Table Load:
[    0.091483] ACPI: SSDT 0xFFFF9AA9FAA62000 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.091877] ACPI: Dynamic OEM Table Load:
[    0.091888] ACPI: SSDT 0xFFFF9AA9FAA5A000 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
[    0.093084] ACPI: EC: EC started
[    0.093086] ACPI: EC: interrupt blocked
[    0.100125] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.100130] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.100133] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.100134] ACPI: Interpreter enabled
[    0.100181] ACPI: (supports S0 S3 S4 S5)
[    0.100184] ACPI: Using IOAPIC for interrupt routing
[    0.100260] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.101234] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.104235] ACPI: Power Resource [USBC] (on)
[    0.113244] ACPI: Power Resource [CLK0] (on)
[    0.113618] ACPI: Power Resource [CLK0] (on)
[    0.113715] ACPI: Power Resource [CLK1] (on)
[    0.121500] ACPI: Power Resource [ID3C] (off)
[    0.128089] ACPI: Power Resource [FN00] (off)
[    0.129170] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.129181] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.129272] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.129296] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.129985] PCI host bridge to bus 0000:00
[    0.129990] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.129994] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.129997] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.130000] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.130003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.130006] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.130008] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.130011] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.130014] pci_bus 0000:00: root bus resource [mem 0xfe800000-0xfe80ffff window]
[    0.130017] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.130031] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    0.130297] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[    0.130326] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.130339] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.130348] pci 0000:00:02.0: reg 0x20: [io  0x2000-0x203f]
[    0.130589] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[    0.130654] pci 0000:00:13.0: reg 0x20: [io  0x2060-0x207f]
[    0.130667] pci 0000:00:13.0: reg 0x24: [mem 0x9141c000-0x9141c7ff]
[    0.130729] pci 0000:00:13.0: PME# supported from D3hot
[    0.130911] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    0.130946] pci 0000:00:14.0: reg 0x10: [mem 0x91400000-0x9140ffff 64bit]
[    0.131042] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.131255] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    0.131284] pci 0000:00:1a.0: reg 0x10: [mem 0x91300000-0x913fffff]
[    0.131297] pci 0000:00:1a.0: reg 0x14: [mem 0x91200000-0x912fffff]
[    0.131385] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.131639] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[    0.131677] pci 0000:00:1b.0: reg 0x10: [mem 0x91410000-0x91413fff 64bit]
[    0.131778] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.131958] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[    0.132074] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.132269] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
[    0.132381] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.132594] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    0.132894] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[    0.132965] pci 0000:00:1f.3: reg 0x10: [mem 0x91418000-0x9141801f]
[    0.133081] pci 0000:00:1f.3: reg 0x20: [io  0x2040-0x205f]
[    0.133516] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.133562] pci 0000:01:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.133602] pci 0000:01:00.0: reg 0x18: [mem 0x91104000-0x91104fff 64bit]
[    0.133628] pci 0000:01:00.0: reg 0x20: [mem 0x91100000-0x91103fff 64bit]
[    0.133768] pci 0000:01:00.0: supports D1 D2
[    0.133771] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.144048] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.144054] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.144060] pci 0000:00:1c.0:   bridge window [mem 0x91100000-0x911fffff]
[    0.144187] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[    0.144237] pci 0000:02:00.0: reg 0x10: [mem 0x91000000-0x9107ffff 64bit]
[    0.144312] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.144421] pci 0000:02:00.0: supports D1 D2
[    0.144423] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.156033] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.156043] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x910fffff]
[    0.157609] acpi 80862288:00: Device [PWM1] is in always present list
[    0.159828] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.159975] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.160132] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.160278] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.160431] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.160585] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.160730] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.160872] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.160927] acpi INT0002:00: Device [GPED] is in always present list
[    0.165789] ACPI: EC: interrupt unblocked
[    0.165815] ACPI: EC: event unblocked
[    0.165852] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.168012] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.168629] SCSI subsystem initialized
[    0.168720] libata version 3.00 loaded.
[    0.168720] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.168720] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.168720] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.168720] vgaarb: loaded
[    0.168720] ACPI: bus type USB registered
[    0.168720] usbcore: registered new interface driver usbfs
[    0.168720] usbcore: registered new interface driver hub
[    0.168720] usbcore: registered new device driver usb
[    0.183482] EDAC MC: Ver: 3.0.0
[    0.183482] PCI: Using ACPI for IRQ routing
[    0.186490] PCI: pci_cache_line_size set to 64 bytes
[    0.186561] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.186564] e820: reserve RAM buffer [mem 0x71832000-0x73ffffff]
[    0.186566] e820: reserve RAM buffer [mem 0x75cff000-0x77ffffff]
[    0.186764] NetLabel: Initializing
[    0.186767] NetLabel:  domain hash size = 128
[    0.186768] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.186798] NetLabel:  unlabeled traffic allowed by default
[    0.186836] clocksource: Switched to clocksource refined-jiffies
[    0.210997] VFS: Disk quotas dquot_6.6.0
[    0.211040] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.211268] AppArmor: AppArmor Filesystem Enabled
[    0.211384] pnp: PnP ACPI init
[    0.211582] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.211587] system 00:00: [io  0x0500-0x05fe] has been reserved
[    0.211591] system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved
[    0.211599] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.211857] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.214534] system 00:02: [mem 0x9141d000-0x9141dfff] has been reserved
[    0.214538] system 00:02: [mem 0x9141b000-0x9141bfff] has been reserved
[    0.214542] system 00:02: [mem 0x91419000-0x91419fff] has been reserved
[    0.214549] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.214735] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.214739] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
[    0.214742] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.214745] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.214748] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
[    0.214751] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
[    0.214755] system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved
[    0.214758] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.214761] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.214768] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.215060] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.215385] pnp: PnP ACPI: found 5 devices
[    0.224060] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.224091] clocksource: Switched to clocksource acpi_pm
[    0.224101] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.224138] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.224144] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.224152] pci 0000:00:1c.0:   bridge window [mem 0x91100000-0x911fffff]
[    0.224169] pci 0000:02:00.0: BAR 6: assigned [mem 0x91080000-0x9108ffff pref]
[    0.224173] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.224180] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x910fffff]
[    0.224192] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.224195] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.224198] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.224201] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.224204] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.224207] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.224209] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.224212] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[    0.224215] pci_bus 0000:00: resource 12 [mem 0xfe800000-0xfe80ffff window]
[    0.224218] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.224221] pci_bus 0000:01: resource 1 [mem 0x91100000-0x911fffff]
[    0.224224] pci_bus 0000:02: resource 1 [mem 0x91000000-0x910fffff]
[    0.224474] NET: Registered protocol family 2
[    0.224834] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.224986] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.225162] TCP: Hash tables configured (established 32768 bind 32768)
[    0.225276] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.225319] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.225462] NET: Registered protocol family 1
[    0.225497] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.227715] PCI: CLS 64 bytes, default 64
[    0.227826] Unpacking initramfs...
[    1.777243] Freeing initrd memory: 50556K
[    1.777295] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.777301] software IO TLB [mem 0x6d832000-0x71832000] (64MB) mapped at [ffff9aa8ed832000-ffff9aa8f1831fff]
[    1.777391] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    1.777448] clocksource: Switched to clocksource tsc
[    1.777549] Scanning for low memory corruption every 60 seconds
[    1.778287] audit: initializing netlink subsys (disabled)
[    1.778386] audit: type=2000 audit(1517095629.778:1): state=initialized audit_enabled=0 res=1
[    1.778971] Initialise system trusted keyrings
[    1.778997] Key type blacklist registered
[    1.779062] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.782019] zbud: loaded
[    1.782911] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.783269] fuse init (API version 7.26)
[    1.786439] Key type asymmetric registered
[    1.786442] Asymmetric key parser 'x509' registered
[    1.786525] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.786592] io scheduler noop registered
[    1.786594] io scheduler deadline registered
[    1.786662] io scheduler cfq registered (default)
[    1.787540] intel_idle: MWAIT substates: 0x33000020
[    1.787543] intel_idle: v0.4.1 model 0x4C
[    1.787734] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.788038] ACPI: AC Adapter [ADP1] (on-line)
[    1.788224] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.788310] ACPI: Lid Switch [LID0]
[    1.788392] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.788425] ACPI: Sleep Button [SLPB]
[    1.788503] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.788600] ACPI: Power Button [PWRF]
[    1.793016] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.793488] thermal LNXTHERM:00: registered as thermal_zone0
[    1.793491] ACPI: Thermal Zone [TZ01] (49 C)
[    1.793548] GHES: HEST is not enabled!
[    1.793759] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.795289] ACPI: Battery Slot [BAT0] (battery present)
[    1.814331] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.817176] Linux agpgart interface v0.103
[    1.821566] loop: module loaded
[    1.821971] libphy: Fixed MDIO Bus: probed
[    1.821973] tun: Universal TUN/TAP device driver, 1.6
[    1.822059] PPP generic driver version 2.4.2
[    1.822150] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.822156] ehci-pci: EHCI PCI platform driver
[    1.822180] ehci-platform: EHCI generic platform driver
[    1.822213] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.822217] ohci-pci: OHCI PCI platform driver
[    1.822234] ohci-platform: OHCI generic platform driver
[    1.822247] uhci_hcd: USB Universal Host Controller Interface driver
[    1.822592] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.822605] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.823758] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01509810
[    1.823766] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.823963] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.823967] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.823969] usb usb1: Product: xHCI Host Controller
[    1.823972] usb usb1: Manufacturer: Linux 4.13.0-31-generic xhci-hcd
[    1.823974] usb usb1: SerialNumber: 0000:00:14.0
[    1.824256] hub 1-0:1.0: USB hub found
[    1.824284] hub 1-0:1.0: 7 ports detected
[    1.826126] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.826134] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.826221] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.826224] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.826227] usb usb2: Product: xHCI Host Controller
[    1.826229] usb usb2: Manufacturer: Linux 4.13.0-31-generic xhci-hcd
[    1.826231] usb usb2: SerialNumber: 0000:00:14.0
[    1.826438] hub 2-0:1.0: USB hub found
[    1.826463] hub 2-0:1.0: 6 ports detected
[    1.827206] usb: port power management may be unreliable
[    1.828177] i8042: PNP: PS/2 Controller [PNP0303:KBD0] at 0x60,0x64 irq 1
[    1.828179] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.829533] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.829730] mousedev: PS/2 mouse device common for all mice
[    1.830093] rtc_cmos 00:04: RTC can wake from S4
[    1.830300] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.830336] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
[    1.830347] i2c /dev entries driver
[    1.830509] device-mapper: uevent: version 1.0.3
[    1.830653] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
[    1.830661] intel_pstate: Intel P-state driver initializing
[    1.831172] ledtrig-cpu: registered to indicate activity on CPUs
[    1.832331] NET: Registered protocol family 10
[    1.847784] Segment Routing with IPv6
[    1.847842] NET: Registered protocol family 17
[    1.847865] Key type dns_resolver registered
[    1.848438] RAS: Correctable Errors collector initialized.
[    1.848518] microcode: sig=0x406c4, pf=0x1, revision=0x404
[    1.848782] microcode: Microcode Update Driver: v2.2.
[    1.848811] sched_clock: Marking stable (1848247530, 0)->(1845259487, 2988043)
[    1.849135] registered taskstats version 1
[    1.849156] Loading compiled-in X.509 certificates
[    1.852250] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.855662] Loaded X.509 cert 'Build time autogenerated kernel key: 61eb76328e0157b319817d11297b1aa90d9bd673'
[    1.855709] zswap: loaded using pool lzo/zbud
[    1.865176] Key type big_key registered
[    1.865186] Key type trusted registered
[    1.869728] Key type encrypted registered
[    1.869736] AppArmor: AppArmor sha1 policy hashing enabled
[    1.869742] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.869792] evm: HMAC attrs: 0x1
[    1.870397]   Magic number: 2:366:505
[    1.870413] i8042 i8042: hash matches
[    1.870597] rtc_cmos 00:04: setting system clock to 2018-01-27 23:27:10 UTC (1517095630)
[    1.870718] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.870719] EDD information not available.
[    1.870816] PM: Hibernation image not present or could not be loaded.
[    1.883622] Freeing unused kernel memory: 2364K
[    1.883626] Write protecting the kernel read-only data: 18432k
[    1.885212] Freeing unused kernel memory: 2024K
[    1.886139] Freeing unused kernel memory: 92K
[    1.890243] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.890244] x86/mm: Checking user space page tables
[    1.894089] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.062468] sdhci: Secure Digital Host Controller Interface driver
[    2.062470] sdhci: Copyright(c) Pierre Ossman
[    2.067098] hidraw: raw HID events driver (C) Jiri Kosina
[    2.088085] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[    2.088681] i2c_hid i2c-SYN1B7F:00: i2c-SYN1B7F:00 supply vdd not found, using dummy regulator
[    2.089528] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    2.121369] ahci 0000:00:13.0: version 3.0
[    2.121684] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    2.121688] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part deso sadm apst
[    2.123466] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.123483] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.128966] scsi host0: ahci
[    2.138755] scsi host1: ahci
[    2.138872] ata1: SATA max UDMA/133 abar m2048@0x9141c000 port 0x9141c100 irq 307
[    2.138875] ata2: SATA max UDMA/133 abar m2048@0x9141c000 port 0x9141c180 irq 307
[    2.142581] r8169 0000:01:00.0 eth0: RTL8168h/8111h at 0xffffbeabc0699000, 30:65:ec:ad:a5:8f, XID 14100800 IRQ 308
[    2.142585] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.177312] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    2.188763] [drm] Memory usable by graphics device = 2048M
[    2.188767] [drm] Replacing VGA console driver
[    2.190740] Console: switching to colour dummy device 80x25
[    2.194163] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.194165] [drm] Driver supports precise vblank timestamp query.
[    2.221101] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.223861] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    2.250651] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[    2.252141] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.252704] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    2.318333] usb 1-2: New USB device found, idVendor=1d57, idProduct=fa20
[    2.318337] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.318339] usb 1-2: Product: 2.4G Receiver
[    2.318341] usb 1-2: Manufacturer: Compx
[    2.436027] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[    2.455309] ata2: SATA link down (SStatus 0 SControl 300)
[    2.455337] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.474535] fbcon: inteldrmfb (fb0) is primary device
[    2.500910] ata1.00: ATA-8: TOSHIBA MQ01ABF050, AM001J, max UDMA/100
[    2.500913] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.503926] ata1.00: configured for UDMA/100
[    2.504239] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABF0 1J   PQ: 0 ANSI: 5
[    2.537023] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.537365] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.537369] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.537403] sd 0:0:0:0: [sda] Write Protect is off
[    2.537407] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.537467] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.595438] usb 1-3: New USB device found, idVendor=04f2, idProduct=b47f
[    2.595443] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.595446] usb 1-3: Product: VGA Webcam
[    2.595450] usb 1-3: Manufacturer: Chicony Electronics Co.,Ltd.
[    2.595452] usb 1-3: SerialNumber: 0x0001
[    2.656570]  sda: sda1 sda2 sda3 sda4
[    2.657585] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.716313] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[    2.859885] usb 1-5: New USB device found, idVendor=05e3, idProduct=0608
[    2.859889] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.859893] usb 1-5: Product: USB2.0 Hub
[    2.861813] hub 1-5:1.0: USB hub found
[    2.862173] hub 1-5:1.0: 4 ports detected
[    2.881161] usbcore: registered new interface driver usbhid
[    2.881162] usbhid: USB HID core driver
[    2.884477] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1D57:FA20.0002/input/input5
[    2.944600] hid-generic 0003:1D57:FA20.0002: input,hidraw0: USB HID v1.00 Keyboard [Compx 2.4G Receiver] on usb-0000:00:14.0-2/input0
[    2.944902] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:1D57:FA20.0003/input/input6
[    2.945417] hid-generic 0003:1D57:FA20.0003: input,hidraw1: USB HID v1.00 Mouse [Compx 2.4G Receiver] on usb-0000:00:14.0-2/input1
[    2.945640] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:1D57:FA20.0004/input/input7
[    3.004990] hid-generic 0003:1D57:FA20.0004: input,hidraw2: USB HID v1.00 Device [Compx 2.4G Receiver] on usb-0000:00:14.0-2/input2
[    3.160387] usb 1-5.1: new full-speed USB device number 5 using xhci_hcd
[    3.263017] usb 1-5.1: New USB device found, idVendor=04ca, idProduct=300b
[    3.263023] usb 1-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.344495] usb 1-5.4: new high-speed USB device number 6 using xhci_hcd
[    3.445947] usb 1-5.4: New USB device found, idVendor=0bda, idProduct=0129
[    3.445952] usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.445955] usb 1-5.4: Product: USB2.0-CRW
[    3.445959] usb 1-5.4: Manufacturer: Generic
[    3.445961] usb 1-5.4: SerialNumber: 20100201396000000
[    3.454110] usbcore: registered new interface driver rtsx_usb
[    3.752737] Console: switching to colour frame buffer device 170x48
[    3.768249] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.212268] raid6: sse2x1   gen()  1127 MB/s
[    5.260195] raid6: sse2x1   xor()  2577 MB/s
[    5.308220] raid6: sse2x2   gen()  1722 MB/s
[    5.356181] raid6: sse2x2   xor()  2867 MB/s
[    5.404178] raid6: sse2x4   gen()  2642 MB/s
[    5.452191] raid6: sse2x4   xor()  2273 MB/s
[    5.452193] raid6: using algorithm sse2x4 gen() 2642 MB/s
[    5.452194] raid6: .... xor() 2273 MB/s, rmw enabled
[    5.452196] raid6: using ssse3x2 recovery algorithm
[    5.454640] xor: measuring software checksum speed
[    5.492205]    prefetch64-sse:  8056.000 MB/sec
[    5.532177]    generic_sse:  6959.000 MB/sec
[    5.532179] xor: using function: prefetch64-sse (8056.000 MB/sec)
[    5.566953] Btrfs loaded, crc32c=crc32c-intel
[   11.290397] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   11.621054] random: crng init done
[   13.054878] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   13.055130] systemd[1]: Detected architecture x86-64.
[   13.065666] systemd[1]: Set hostname to <ibo>.
[   15.277588] systemd[1]: Listening on Journal Socket.
[   15.277926] systemd[1]: Created slice System Slice.
[   15.279099] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   15.280358] systemd[1]: Mounting POSIX Message Queue File System...
[   15.280423] systemd[1]: Reached target Encrypted Volumes.
[   15.280618] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[   15.281941] systemd[1]: Started Braille Device Support.
[   16.479430] lp: driver loaded but no devices found
[   16.637909] ppdev: user-space parallel port driver
[   28.761639] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[   28.848904] systemd-journald[328]: Received request to flush runtime journal from PID 1
[   29.410896] audit: type=1400 audit(1517095658.040:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=543 comm="apparmor_parser"
[   29.410903] audit: type=1400 audit(1517095658.040:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=543 comm="apparmor_parser"
[   29.412678] audit: type=1400 audit(1517095658.042:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=544 comm="apparmor_parser"
[   29.412684] audit: type=1400 audit(1517095658.042:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=544 comm="apparmor_parser"
[   29.412688] audit: type=1400 audit(1517095658.042:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=544 comm="apparmor_parser"
[   29.412692] audit: type=1400 audit(1517095658.042:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=544 comm="apparmor_parser"
[   29.415645] audit: type=1400 audit(1517095658.045:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=546 comm="apparmor_parser"
[   29.418979] audit: type=1400 audit(1517095658.048:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=547 comm="apparmor_parser"
[   29.421760] audit: type=1400 audit(1517095658.051:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=549 comm="apparmor_parser"
[   29.428410] audit: type=1400 audit(1517095658.056:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=550 comm="apparmor_parser"
[   29.957508] nfc: nfc_init: NFC Core ver 0.1
[   29.957544] NET: Registered protocol family 39
[   30.120326] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[   30.236834] Bluetooth: Core ver 2.22
[   30.236868] NET: Registered protocol family 31
[   30.236869] Bluetooth: HCI device and connection manager initialized
[   30.236874] Bluetooth: HCI socket layer initialized
[   30.236878] Bluetooth: L2CAP socket layer initialized
[   30.236887] Bluetooth: SCO socket layer initialized
[   30.462319] Bluetooth: HCI UART driver ver 2.3
[   30.462322] Bluetooth: HCI UART protocol H4 registered
[   30.462323] Bluetooth: HCI UART protocol BCSP registered
[   30.465128] Bluetooth: HCI UART protocol LL registered
[   30.465131] Bluetooth: HCI UART protocol ATH3K registered
[   30.465133] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   30.465191] Bluetooth: HCI UART protocol Intel registered
[   30.465213] Bluetooth: HCI UART protocol Broadcom registered
[   30.465215] Bluetooth: HCI UART protocol QCA registered
[   30.465216] Bluetooth: HCI UART protocol AG6XX registered
[   30.465217] Bluetooth: HCI UART protocol Marvell registered
[   30.639895] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   31.274829] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   31.544732] input: SYN1B7F:00 06CB:7406 Touchpad as /devices/pci0000:00/808622C1:05/i2c-0/i2c-SYN1B7F:00/0018:06CB:7406.0001/input/input9
[   31.544941] hid-multitouch 0018:06CB:7406.0001: input,hidraw3: I2C HID v1.00 Mouse [SYN1B7F:00 06CB:7406] on i2c-SYN1B7F:00
[   31.822213] media: Linux media interface: v0.10
[   31.844641] usbcore: registered new interface driver btusb
[   31.937126] ath: phy0: WB335 2-ANT card detected
[   31.937130] ath: phy0: Set BT/WLAN RX diversity capability
[   31.945131] ath: phy0: Enable LNA combining
[   31.946310] ath: phy0: ASPM enabled: 0x42
[   31.946313] ath: EEPROM regdomain: 0x65
[   31.946314] ath: EEPROM indicates we should expect a direct regpair map
[   31.946317] ath: Country alpha2 being used: 00
[   31.946317] ath: Regpair used: 0x65
[   32.063418] acer_wmi: Acer Laptop ACPI-WMI Extras
[   32.063438] acer_wmi: Function bitmap for Communication Button: 0x801
[   32.071737] input: Acer WMI hotkeys as /devices/virtual/input/input14
[   32.282810] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   32.282815] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   32.282817] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   32.282819] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   32.282820] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   32.282823] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1b
[   32.285971] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   32.287407] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffbeabc1280000, irq=17
[   32.312992] Linux video capture interface: v2.00
[   32.339093] usbcore: registered new interface driver ath3k
[   32.422191] uvcvideo: Found UVC 1.00 device VGA Webcam (04f2:b47f)
[   32.428204] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized!
[   32.428208] uvcvideo 1-3:1.0: Entity type for entity Extension 7 was not initialized!
[   32.428210] uvcvideo 1-3:1.0: Entity type for entity Processing 2 was not initialized!
[   32.428212] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
[   32.428357] input: VGA Webcam: VGA Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input16
[   32.428494] usbcore: registered new interface driver uvcvideo
[   32.428495] USB Video Class driver (1.1.1)
[   32.464297] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   32.464414] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   32.496820] usb 1-5.1: USB disconnect, device number 5
[   32.562884] SSE version of gcm_enc/dec engaged.
[   32.589663] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[   32.720282] usb 1-5.1: new full-speed USB device number 7 using xhci_hcd
[   32.821837] usb 1-5.1: New USB device found, idVendor=04ca, idProduct=300b
[   32.821841] usb 1-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   33.302896] intel_rapl: Found RAPL domain package
[   33.302905] intel_rapl: Found RAPL domain core
[  105.635651] new mount options do not match the existing superblock, will be ignored
[  106.477650] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  106.477653] Bluetooth: BNEP filters: protocol multicast
[  106.477659] Bluetooth: BNEP socket layer initialized
[  109.684686] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  109.699240] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  109.709925] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[  109.786953] r8169 0000:01:00.0 enp1s0: link down
[  109.787054] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[  110.002534] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  111.910384] wlp2s0: authenticate with 18:d6:c7:30:54:36
[  111.928855] wlp2s0: send auth to 18:d6:c7:30:54:36 (try 1/3)
[  111.933657] wlp2s0: authenticated
[  111.936305] wlp2s0: associate with 18:d6:c7:30:54:36 (try 1/3)
[  111.940634] wlp2s0: RX AssocResp from 18:d6:c7:30:54:36 (capab=0x1411 status=0 aid=4)
[  111.940799] wlp2s0: associated
[  111.940879] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  115.172457] vboxdrv: loading out-of-tree module taints kernel.
[  115.172875] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[  115.186379] vboxdrv: Found 2 processor cores
[  115.209409] vboxdrv: TSC mode is Invariant, tentative frequency 1600000039 Hz
[  115.209411] vboxdrv: Successfully loaded version 5.0.40_Ubuntu (interface 0x00240000)
[  115.231915] VBoxNetFlt: Successfully started.
[  115.264430] VBoxNetAdp: Successfully started.
[  115.308805] VBoxPciLinuxInit
[  115.347325] vboxpci: IOMMU not found (not registered)
[  129.786817] Bluetooth: RFCOMM TTY layer initialized
[  129.786828] Bluetooth: RFCOMM socket layer initialized
[  129.786837] Bluetooth: RFCOMM ver 1.11
ibo@ibo ~ $

---- Mesajlar birleştirildi ----

burda daha iyi görünüyo buyrun...
Ekli dosyayı görüntüle 33904

---- Mesajlar birleştirildi ----

1JDWlG.png


---- Mesajlar birleştirildi ----

burda daha net gözüküyo
 
Son düzenleme:
Üst