• SDN Forum üyelikleri çok yakında yeniden açılıyor. Siz de bu büyük topluluğun bir parçası olmak için bizi takipte kalın, gelişmeleri kaçırmayın!

Yardım Intel Xeon phi 7110P Erişim Problemi

mehmetgunhan

Öğrenci
Katılım
26 Kasım 2021
Mesajlar
1
Reaksiyon puanı
0
Puanları
1
Yaş
47
Aşağıdaki konu ile alakalı bize yardımcı olmanızı istirham ediyoruz. Xeon phi yardımcı işlemciyi internete çıkartamıyoruz.

işletim sistemi : Windows 10

Anakart : Asus Z10PE D16 WS

Yardımcı işlemci işlemci pci card : Xeon phi 7110P

----mic0--ağ------------
ip adres: 192.168.1.100
subnet : 255.255.255.0
gw: 192.168.1.253
nameserver : 8.8.8.8

---anakart - ağ -------

ip adres : 192.168.1.150
subnet : 255.255.255.0
gw: 192.168.1.253



-------xeon OS------------

busybox 2.17

===================

1- Putty üzerinden SSH ile bağlantı sağlayabiliyoruz.

2- Windows üzerinden mic0 gw 192.168.1.99 ping atıyoruz.

3- Windows üzerinde mic0 ip adresi 192.168.1.100 ping atıyoruz.

4- mic0 içerisinden ping 192.168.1.253 - 192.168.1.150 bağlamaya çalıştığımızda.

[root@mic0 ~]# ping 192.168.1.150
PING 192.168.1.150 (192.168.1.150) 56(84) bytes of data.
From 192.168.1.100 icmp_seq=1 Destination Host Unreachable
From 192.168.1.100 icmp_seq=2 Destination Host Unreachable
From 192.168.1.100 icmp_seq=3 Destination Host Unreachable
From 192.168.1.100 icmp_seq=4 Destination Host Unreachable
From 192.168.1.100 icmp_seq=5 Destination Host Unreachable
From 192.168.1.100 icmp_seq=6 Destination Host Unreachable
From 192.168.1.100 icmp_seq=7 Destination Host Unreachable
From 192.168.1.100 icmp_seq=8 Destination Host Unreachable
From 192.168.1.100 icmp_seq=9 Destination Host Unreachable
From 192.168.1.100 icmp_seq=10 Destination Host Unreachable
From 192.168.1.100 icmp_seq=11 Destination Host Unreachable
From 192.168.1.100 icmp_seq=12 Destination Host Unreachable

------------------------
Ayrıca; route flags değiştirmeyi başaramadık.

[root@mic0 ~]# route -n
Kernel IP routing table
Destination / Gateway / Genmask / Flags / Metric / Ref / Use / Iface
0.0.0.0 / 192.168.1.253 / 255.255.255.0 / UG /0 / 0 / 0 / mic0
192.168.1.0 / 0.0.0.0 / 255.255.255.0 / U / 0 / 0 / 0 / mic0
0.0.0.0 / 192.168.1.253 / 0.0.0.0 / UG / 0 / 0 / 0 / mic0
------------------------------
[root@mic0 ~]# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:174 errors:0 dropped:0 overruns:0 frame:0
TX packets:174 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:19608 (19.1 KiB) TX bytes:19608 (19.1 KiB)

mic0 Link encap:Ethernet HWaddr 4C5A
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MTU:64512 Metric:1
RX packets:12044 errors:0 dropped:3 overruns:0 frame:0
TX packets:5000 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1921304 (1.8 MiB) TX bytes:666988 (651.3 KiB)

sorunu çözemedik. Bu konuda yardımcı olabilir misiniz.
 
Üst